DriverFix
DriverFix has a cloud database of over 18 million drivers so it will find your printer driver in seconds.
2. Check the ink levels
A good first step for you to do will be to see if the printer has enough ink in its repository.
Printers of every kind allow the users to check the ink level, which can be either via PC or straight off from the printer device itself.
Since this process is different for every printer, be sure to check the user manual for specific instructions.
The associated printer app should have the necessary information and will let you know if the ink levels are within normal limits.
3. Clean the print head nozzles
This again is something that needs to be done periodically as the nozzles often tend to get choked, more so if the printer has been sitting idle for a considerable period of time.
That is also precisely the reason the printer also comes with a self-cleaning operation to clean choked nozzles.
However, all printers have their own unique ways to initiate the cleaning process, so be sure to check out your printer manual.
However, a general rule of thumb is that the process can be started from within the maintenance section.
Also, it might be necessary for the cleaning operation to be performed multiple times for a good and thorough cleaning job.
3. Check the alignment
The alignment of the print cartridges or toners can also be equally important in determining the quality of the print. So, check to see if the alignment is perfect for the type of print you need.
If need be, perform the alignment operation multiple times until the desired result is obtained.
Refer to the company manual for steps on this though this is another option that is usually found in the maintenance section.
4. Settings issue
Most printers allow the user to set the quality of the print. Those can vary from draft quality to anything resembling the best quality.
Changing the setting to that which offers the highest quality of prints can also solve the issue of blurry prints.
5. Use the right paper
Poor quality of paper used for printing can also lead to blurry prints.
That makes it important that you use paper of the right quality that can be the best match for your printer, or for that matter, the type of ink that the printer uses.
Using the right sized paper is equally important for getting the best quality prints each time.
However, if your printer is still printing blurry, there might be something wrong with the hardware itself. In that case, it’s best to contact the official repair center.
Editor’s Note: This post was originally published in May 2019 and has been since revamped and updated in September 2020 for freshness, accuracy, and comprehensiveness.
Thank you for viewing the article, if you find it interesting, you can support us by buying at the link:: https://officerambo.com/shop/
No comments:
Post a Comment